Fig. 12 Burner removal
3.3
REMOVING THE CONTROL TAP / MICROSWITCH FROM THE FIRE
a)
Remove the outer case as section 3.1
b)
Remove the service plate from the control valve air duct by unscrewing
the two screws. See fig. 13
c)
Unscrew the control valve lock-nut from the top of the control valve.
d)
Unscrew the two control valve panel fixing screws fig. 14 and remove
valve and panel.
e)
Loosen and remove the three gas pipe retaining nuts from the control
valve and release the ends of the gas pipes from the control valve body.
f)
Remove the thermocouple by pulling down straight on the
push fit
connector
.
g)
Re-assemble in the reverse order
Fig. 13
Service Plate Removal
Position of Burner
Screws
18
