Operator’s Handbook for
Fassmer rescue boats Type RR 4.2
Document 40.0420-019.01.01.0
Art. No. 135897
Mod. 0 Lange/WZ 03.11.2006
8
3. Ensuring release hook closure.
In most cases the release hook is part of the davit and has to be operated
according it’s own instructions. In such case refer to instruction of release
hook. (Such hooks are not a Fassmer hooks).
Only in the case a Fassmer release hook is installed:
!
Check arrow “A” to be at the notch on the side plate.
!
Check the position of the release bolt (1). The mark must be in line with
the green “OK” arrow.
!
Check release handle (2) is secured with the safety pin (3).
!
Check shackle bolt (4) is closed.
Fig. 3a
Fig. 3b
Caution:
Do not open the boat lashings or lower the rescue boat before
checking the correct position of the release hooks, release bolts
and the release handle!
4. Switch the battery change-over control (1) to battery 1 or 2, if fitted.
(only for rescue boats with a electric starter)
Battery change-over switch
2
1
Battery
Battery
2
1
1+2
OFF
WARNING: Use only Battery 1 or 2. Both together only in
emergency. Don´t switch off when engine is running.
Danger of generator damage!
Fig. 4
Remark
Rescue boats with an outboard engine from 15 HP to 30 HP
have no electric system. Therefore these boats are not equipped
with a battery change-over control.
1
1
2
3
A
4
