40 |
P a g e
9
Reading Times into the Meet Management Application
You need to import the results into your meet management application after the times for a race have
been recorded and saved by
FlashTiming
.
9.1
Hy-Tek’s Meet Manger
Click
Run
in the main menu of
Meet Manager
. In the Run the Meet scene, click the race in the event list
and press the
Get Times
button (hotkey F3). Your
FlashTiming
results are read in and recorded. If an
event had multiple heats, you must get the times for all heats before scoring the event.
9.2
AthleticNET’s Run Meet
Run Meet will automatically detect a new results file and import the results to Run Meet and upload the
results to AthleticNET.
As soon as you see the message that an event was pushed to the database, the results will appear in Run
Meet under the
Results
tab and indicate the results were brought from a FAT system. Once the event
has times or other results (i.e., DNS, DNF, DQ, etc.) for every participant, you can click
Mark Complete
to
publish the results to your AthleticNET meet page immediately.
9.3
Apple Raceberry JaM’s ScoreMeetLynx
The
FlashTiming
results files are automatically named using the event number, round number and heat
number. The numbers are separated by ‘-’ and the filename has the extension “lif”. For example, the
results file for event 12, round 1, heat 3 is named “012-1-03.lif.
ScoreMeetLynx
users must select the
corresponding result file for each heat when importing the times from
FlashTiming
. Be sure to note of
the filename when you save the times in
FlashTiming
.
To read the results into
ScoreMeetLynx
:
1.
Click the
Enter Results
button.
2.
Select the event in the event list and click
Okay
3.
Enter the heat number, check
Get times from
Lynx/FlashTiming/MacFinish file
and then click
Okay.
4.
You are asked to locate the file with a standard File Open dialog. Locate the results file in your meet
management data folder. Click
Okay
and the results are imported.
9.4
DirectAthletics MeetPro
Click the
Enter Results
Tab to score your meet. Click
Get Event Results
button (above the entries grid)
and your
FlashTiming
results are read in and recorded. If an event had multiple heats, you must get the
times for all heats before scoring the event. To import just the currently selected heat, toggle the
Get
Event Results
button to
Get Heat Results
.
9.5
EasyWare Easy Meet Manager
The
FlashTiming
results files are automatically named using the event number, round number and heat
number. The numbers are separated by ‘-’ and the filename has the extension “lif”. For example, the
results file for event 12, round 1, heat 3 is named “012-1-03.lif.
Easy Meet Manager
users must select
the corresponding result file for each heat when importing the times from
FlashTiming
. Be sure to note
the filename when you save the times in
FlashTiming
.
1.
Click
Enter Results
from the
Easy Meet Manager’s
main menu bar.
2.
Select
FlashTiming
from the
Type of Electronic Timer
drop down menu and then
Ok.
3.
Select the event and heat to score.
