Flashforge Waxjet 400, User Manual, Page: 8 / 108

WaxJet® 400/410 series printers are for indoor use only.
The equipment needs to be placed in a dry and ventilated
environment. Leave at least 60cm between the machine and
the back wall, at least 100cm of space on both sides of the
machine (machine maintenance space), and at least 120cm
in front of the printer to open the material chamber. The
space must be ≥ length x width = 3.3m x 2.5m.
Each machine shall be separately introduced from the
master switch, and each machine shall be equipped with a
40A air switch and a 3-hole 25A socket. Six square power
wires are recommended.
Every printer needs ground connections, which protects
users to a certain extent.
Before using the printer to print, you must first save or
export the print data file as .stl or .slc file industrial standard
format and submit it via the network.WaxJet client software
can be installed on selected user workstations to facilitate
users to select, preview and submit print jobs, and manage
print queues.
The WaxJet® 400/410 series printing system needs to be
equipped with an Ethernet connection to transfer print jobs
from the workstation to the printer.
Please set up and start the installed TCP / IP network. The
RJ45 Ethernet network connection must be installed, tested
and operated at the receipt location for each printer to
come. DHCP or an assigned static IP address is also allowed.
The DHCP server can automatically generate the IP address;
or, the network administrator can assign a permanent IP
address to each printer that is to be connected to the
network.
The operating temperature of the system should be in the
range of 18°C to 24°C (59°F to 86°F), and the maximum
temperature must not exceed 28°C (82°F). The relative
humidity should be in the range of 30% to 70% (non-con-
densing).
The facility air-conditioning system of the printer operating
environment should have a heat dissipation capacity of 2.0
kW, or be able to meet the temperature requirements. Make
sure that any air-conditioning outlets do not directly face the
3D printer system. It is recommended to place the machine
in a room with four times air changes per hour.
The storage temperature of the system should be in the
range of 0°C to 35°C (32°F to 95°F), and the relative humidity
range should be 20% to 90% (non-condensing).
The 3D printer system is equipped with a build chamber with
built-in lighting and a display panel. It is necessary to
provide lighting for regular areas when operating and
maintaining the system. Therefore, for indoor lighting,
fluorescent lamps or LEDs are the best system lighting
options.Do not place the printer near windows that can be
exposed to sunlight.
The altitude should not exceed 2000 meters (6561.68 feet).
Machine placement requirements
Please make sure you use the FlashForge Material or the
Material from the brands accepted by FlashForge. Poor
quality or incompatible consumables can easily cause
Printhead blockage and Printhead damage.
Do not copy or print any items that are prohibited by law.
According to local laws, it is generally illegal to copy or
print the following items:
1. Guns
2. Copy works protected by copyright. Some copyrighted
works can be partially copied for "fair use". Multiple copies
will be regarded as improper use. An artistic work is
equivalent to a copyrighted work.
The above list is for reference only and does not include all
the content. The Flashforge is not responsible for its
completeness and accuracy. If you have questions about
the legality of copying or printing certain items, please
consult legal counsel.
All the information in this document is subject to any
amendment or change without the official authorization
from FlashForge.
The user has no right to make any modification on this user
guide.The Flashforge will not be responsible for any safety
accident caused by customer's disassembly or modification
of the printer. No one is allowed to modify or translate this
guide without the permission of Flashforge. This user guide
is protected by copyright and Flashforge reserves its right
of final interpretation of this guide.
Legal Notice
Do not leave the running equipment for a long time.
Do not make any modifications to the equipment by
yourself.
Please operate the equipment in a ventilated environment.
Do not use this device to conduct illegal and criminal
activities.
Do not use this equipment to make food storage products.
Do not use this equipment to make electrical products.
Do not put the printed model in the mouth.
Do not use brute force to remove the printed model.
Please keep the printer away from flammable gas, liquid
and dust when working. (The high temperature generated
by equipment operation may react with dust, liquid, and
flammable gas in the air to cause a fire)
Children and untrained personnel should not operate the
equipment alone.
Machine use guide
Material Requirements
Project prohibited by law
Legal Notice
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43
44 45 46 47 48 49 50 51
52 53 54
55 56 57 58 59 60 61
62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77
78 79 80 81 82 83 84 85
86 87 88 89 90 91 92 93
94 95 96 97 98 99 100 101
102 103