manualshive.com logo in svg

Flashforge Waxjet 400, User Manual, Page: 32 / 108

Share
Download
Flashforge Waxjet 400 User Manual Download Page 32

开箱步骤

Chapter 6 Printing process

       This chapter provides you with detailed guidance on how to transform a 3D model into an entity. Before printing, it is recommend-

ed that you review the process of machine start up, preheating and material installation on the chapter 3 and check the functionality 

and performance of the WaxJetPrint software.

1. The printer is powered on and warming up.

3. The printer stay warm after preheat finished. 

2. Install the materials. 

5. Connect the printer. 

Note: if it is the first time to connect the printer, please 

see initial setting (page 29). Click setting, choose 

printer. Material , printing mode, printing pattern and 

save the settings.

4. Turn on the WaxJetPrint software via the shortcut on desktop.

01

02

03

04

05

06 

07

08

09

10

11

12

13

14

15

16

17 

18 

19

20

21

22

23

24

25

26 

27

28

29

30

31

32

33 

34

35 

36

37 

38 

39 

40

41 

42 

43 

44

45 

46 

47 

48

49 

50 

51 

52

53 

54 

55 

56

57 

58 

59 

60

61 

62 

63 

64

65 

66 

67 

68

69 

70 

71 

72

73 

74 

75 

76

77 

78 

79 

80

81 

82 

83 

84

85 

86 

87 

88

89 

90 

91 

92

93 

94 

95 

96

97 

98 

99

100 

101 

102

103 

Summary of Contents for Waxjet 400













































































































Reviews:

No comments