Flashforge THOR300T, Quick Start Manual

Page: 15 / 40

14
8. Put a A4 paper between nozzle and the build plate. Adjust the nut with one hand and feel the
friction by sliding A4 paper back and forth with the other hand.
[1]. If the paper slides through easily, the nozzle and the build plate are too far apart.Rotate the
nut clockwise to increase the distance between them.
[2]. If the paper cannot slide through, rotate the nut anticlockwise to decrease the distance
between them.
[3]. The distance between nozzle and the build plate is suitable when feeling sight friction when
sliding the paper. Move the extruder to the top of the second leveling point, and do leveling in
the same way. And so on, when finishing four leveling points, leveling completed.
The extruder of Thor series printer can be moved left and right, the build plate can be moved back
and forth. Please slide the extruder and the build plate manually to adjust the extruder on the top
of the leveling nut.