Flashforge THOR300T, Quick Start Manual

Page: 12 / 40

11
21. As is shown, find a shorter [Z-axis sensor
cable] on the left of the printer.
22. Insert Z-axis sensor cable into Z-axis sensor,
and sensor is inside the left T-type fixed seat.
Attention: The side of the plug with two
protuberances should be oriented to the right
of the printer.
23. As is shown, find [X-axis sensor cable]
marked with [X-Max], insert it into the X-axis
sensor socket at the back of X-axis motor.
Attention: The side of the plug with two
protuberances should be oriented to the back
of the printer.
24. Find a longer [filament detector sensor cable]
on the right of the printer, insert it into the
filament detector of the filament fixed seat.
25. Attention: The side of the plug with two
protuberances should be oriented to the
back of the printer. 26. As is shown, fix [Filament detector sensor
cable] with ribbons, hardware installation
completed.