Page 26
Chapter 6. Connecting the Antennas Cables
The antenna cables are connected through the cable access plate on the top of the cabinet.
Figure 4.1 Cable Access Plate on Top of Cabinet
shows the cable access plate in place.
Before connecting the cables, the cable access plate must be removed. This gives access to the
cable mating connectors. See
Figure 6.1 Top of Cabinet with Cable Access Plate Removed
.
CAUTION:
All antenna operations should be performed by qualified personnel only.
Installers must meet the requirements of FCC Bulletin OET 65 and coax
terminations and have expertise working with RF coaxial cable. Care
must be taken not to crimp or damage the cables.
Figure 6.1 Top of Cabinet with Cable Access Plate Removed
RadioRouter
®
BaseStation Installation Guide — Draft
Version 0.5 - © 2003
Page 26
