12
•
Never use this appliance for other than the intended use. Do not use this appliance to
prepare food.
•
You must have clear and easy access to the on/off valve AFTER the appliance is installed and
connected to the gas supply to safely turn off the burner.
•
Never use this appliance for other than the intended use. Do not use this appliance to
prepare food. N
•
You must have clear and easy access to the on/off valve AFTER the appliance is installed and
connected to the gas supply to safely turn off the burner.
•
Do not bypass thermocouple safety.
•
Do not operate the appliance if any part has been under water. Immediately call a qualified
service technician to inspect the appliance and replace any part of the control system and
any gas control, which has been underwater.
•
the gas control is exposed to water in any way, DO NOT try to use the appliance. The gas
control must be replaced.
•
Hose: Check for abrasions, melting, cuts, and cracks in the hose. If any of these conditions
exist, do not use the appliance. Have the part replaced by your fireplace dealer or qualified
gas installer.
•
To avoid the possibility of burns, maintenance should be done only when the appliance is
cool. Avoid unprotected contact with hot surfaces. Ensure burner is turned off. Turn gas off
at source and disconnect the appliance before servicing. Clean the appliance in an area
where cleaning solutions will not harm decks, lawns, or patios. Do not use flammable,
corrosive, or abrasive cleaners.
•
The appliance area must be clear and free from combustible materials, gasoline and other
flammable vapors and liquids. Do not obstruct the flow of combustion and ventilation air.
Keep the ventilation opening of the cylinder enclosure free and clear of debris.
•
Disconnect the power supply from the appliance before servicing. Turn off the appliance
completely and let cool before servicing. Only a qualified service person should service and
repair this electric appliance.
The appliance has been designed with several safety features, which include a safety valve. If
the burner flame is extinguished the appliance will automatically shut down. Any modification
to the appliance may compromise the safety of this appliance. Special concern is as follows.
Initial Lighting:
When lit for the first time, the appliance emits a slight odor. This is a normal
temporary condition caused by the
“burn
-
in” of internal paints and lubricants used in the
manufacturing process and does not occur again. Simply run the main burner on high for
approximately one-half hour.
WARNING
