11
Glass embers may have a fine oil residue that needs to be cleaned prior to installation.
Clean the glass with mild dish soap, drain, rinse thoroughly and dry before installing. Glass
embers may have sharp edges, wear safety glasses and gloves when handling. Do not
change or substitute the glass ember material provided with this appliance. If replacing,
use only replacement glass embers available from your local authorized dealer/distributor.
Real rocks must not be used in this appliance. Heat will cause them to explode.
Keep face and body away from burner area when lighting. Ensure burner controls are in
the off position. Slowly turn on the gas supply valve. The propane cylinder is equipped
with an excess flow device. Unless burners are turned off prior to turning the cylinder
on, only small flames and low heat will be achievable. If the burner does not light within
10 seconds, turn the valve off and wait 5 minutes for any gas to dissipate before
repeating the procedure.
WARNING
WARNING
