15 |
P a g e
PAIRING REMOTE WITH FIREPLACE RECEIVER
Your remote will come paired with the fireplace receiver to allow for operation out of the box. In the event of a
remote or receiver replacement, use the following procedure to pair the remote with the receiver:
INITIALIZING THE SYSTEM FOR THE FIRST TIME
-
Install 3 AAA type batteries in the remote battery bay located on the remote back.
-
Press the SW1 button on the module see the following figure, the module will beep 3 times to indicate
that it is ready to synchronize with the remote.
-
Press the ON/OFF button in the remote, the module will beep 4 times to indicate that the remote and the
module are synchronized to each other.
