PFSIFP8
Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 20
Chapter 5 Display and Disposal of System Information
PFSIFP8 can be started after installation according to description in Chapter 4. Turn on
the power supply, and main and standby power switch on the FACP, the FACP executes
self-test and enter normal standby state. The system will display properly if it is in
normal state, otherwise it will display abnormal information.
5.1 Normal Information
The normal display is shown in Fig. 5-1, which means the system is running normally,
and only
POWER
LED lights. In status bar, only the status of FIRE ALARM ROUTING
(FAR) and OUTPUT TO FPE (FPE) is displayed.
Fig. 5-1
Fig. 5-2 shows the system is in normal standby state but with disabled devices. In this
case, the FACP works normally, but corresponding LEDs on the front panel illuminate.
Fig. 5-2
Summary of Contents for PFSIFP8
Page 1: ......