2.4 AUDIO schemes
The module has two audio inputs, which are alternately routed to the filter channels. Input ODD is
routed to the odd-numbered channels and input EVEN to the even-numbered channels. If only one
cable is plugged into the ODD/ALL input socket, the input signal is routed to all filter channels
(ALL=mono input).
EFFECT MIX
Both inputs ODD+EVEN are routed together to the GAIN controller, which is then present as a mono
signal at the MIX controller (dry) (original signal). The MIX controller controls the mixing ratio between
this original signal and the effect signal (wet), which consists of the output sum of all filter channels
(Mono Signa =EVEN + ODD outputs). When the MIX control is in the middle position, the volumes
of the original and effect signals are approximately the same. The LEVEL control then determines the
level of the mix signal at the ALL output socket.
The maximum level of both filter channel groups is always present at the two outputs ODD and
EVEN. This can be viewed as the stereo output of the filter bank. The filter bank is therefore suitable
for stereo applications.
Each of the 12 filter channels has an additional audio output (modular level). The output level is inde-
pendent of the slider position so that the signal can be processed externally even though it has been
removed from the mix.
The sliders only serve as a manual attenuator for the corresponding channel. In order to hear a con-
trolled sequence, the slider must be turned up. The maximum output signal is therefore determined
by the position of the slider.
7
