When the modulation sequencer is disabled, the filter bank can generate filter simulations. The
individual filter bands are then controlled in such a way that classic filter profiles are generated.
These are controlled with the knobs Envelope, Variation and Fill.
ACTIVATE MANUALLY MODE:
Use the “
<
” button to set the sequence to “
oF
”
(possibly press several times!).
In this mode, the controllers have the following functions:
Knob ENVELOPE: SMOOTH = Smoothing of passing through the filter bands
Knob VARIATION: FILTER TYPE = selection of one of 6 filter types
Knob FILL:
CUTOFF = Adjust filter type cutoff
FILTERTYPE
The VARIATION control sets one of six filter types. These algorithms use the filter bands to simu-
late classic filter types such as lowpass, bandpass, highpass and other types. This is possible
because each filter band has its own VCA (Voltage Controlled Amplifier) that controls the volu-
me of that band separately. For example, if you slowly increase and decrease the volume of the
channels, starting from the band with the lowest frequency, you get a classic low-pass filter.
The following filter types can be set:
1 - All channels
- all bands are turned up simultaneously
2 - Lowpass
3 - Bandpass (1channel)
4 - Bandpass (2 channels)
5 - Bandpass (3 channels)
6 - Highpass
3.5 MODE MANUALLY
14
Pot VARIATION = FILTERTYPE
1
6
2
3
4
5
