Heat recovery unit RDAF - Technical manual
20
FläktGroup DC_9349GB_20190326_R4
We reserve the right to make changes without prior notice
CONTROL PANEL OPERATION, COMMISSIONING
ADJUSTMENT
There are two ways to enter the adjustment menu.
1. The first is to press the question mark on the start screen. The
question mark will not be shown if the menu has been opened pre-
viously.
2. The second is to go to Menu/Settings/Login and select
“2 Adjustment”.
Press “2.1 Start” for a step-by-step guide through the settings required
for adjustment. To change a single value, go directly to a specific
menu.
The speeds for each operating mode can be changed in two ways:
Option 1
- Press the name
Option 2
- Press the value
STANDARD
The unit can be ordered with two different configurations:
Standard – set the fan speed in % of max speed
CO
2
control – set the desired CO
2
level
Option 1
Option 2
