Heat recovery unit RDKS - Technical manual
16
FläktGroup DC_9295GB_20190326_R5
We reserve the right to make changes without prior notice
INTRODUCTION
If the unit is not installed immediately after delivery, it should be stored
well-protected under a roof in its original packaging. We recommend
that the unit always be lifted by two people. Protective gloves should be
worn.
INSTALLATION OPTIONS
The unit should be positioned as shown in the ventilation drawing. If no
ventilation drawing is available, installation should be done according to
one of the installation options below. The unit is intended for installation
indoors in a warm space.
The unit must be connected to an earthed power
outlet.
!
To prevent accidents and injury:
The unit must be connected to ducting and the door
must be closed before the power is switched on.
!
INSTALLATION OPTIONS AND DUCT DEFINITIONS
T
K
U
F
A
DUCT DEFINITIONS
Figure 15. Duct definitions.
T = Supply air
F = Extract air
U = Outdoor air
A = Exhaust air
K = Extract air device in kitchen (not above cooker).
Ducts U and F should be increased to Ø125 mm as
soon as space allows after the unit.
