1. To stream to the television or projector select the
video connection button at top of screen.
2. Select the FLAIM device by clicking on its name
(eg. FLAIMXXX) and wait until the message below
shows ‘Connected’.
3. You should see “Connecting to this display” on
your television or projector. It may take 10-20
seconds to connect.
4. FLAIM Extinguisher will now be streaming to the
television or projector. It will show the VR headset view.
5. Note: It will only stream while the headset is placed on your head. The television or projector
screen will pause when the headset is removed.
6. Short press ‘Home’ button on the controller to close the overlay.
1. To connect to Wi-Fi select the Wi-Fi button at
top of screen.
2. Select Wi-Fi on the resulting overlay to open
Wi-Fi settings.
3. Select desired Wi-Fi network, enter password and
wait until the message below shows ‘Connected’.
4. Select the ‘X’ button to close the overlay.
Streaming to Monitor/TV/Projector
Figure 9:
Wi-Fi Connection Button
Connecting to Wi-Fi
Figure 8:
Video Connection Button
12
Summary of Contents for Extinguisher V3
Page 11: ...10 ...
