1. Remove the VR headset and headset battery from the case.
2. Take off the magnetic back pad.
3. Install the headset battery by aligning the slots, and then push to click into place.
4. Reattach the magnetic back pad.
5. Put on the VR headset by putting it over your eyes first, and then sliding it over the back of
your head. Ensure it is fitted firmly. To tighten the fit for the user, the VR headset can be
adjusted at the back via the adjustment knob and on top of the head using the strap.
6. To power on the VR headset, hold down the power button for a few seconds (on the back right
side of the headset nearby the power indicator).
7. The VR headset is ON once the VIVE Focus 3 logo appears. Whenever you see the spinning
image it is important to look down at a clear floor to ensure accurate floor height calibration.
8. Adjust the headset lens spacing using the dial for better experience (if required).
Step 6: Powering of the FLAIM Extinguisher controller tracking system
Figure 6:
Hose Tracker Power Button
Figure 7:
Right Controller Home/Power Button
Home/Power Button
Power Button
Step 5: Set up the VR headset
1. Short press the highlighted buttons (Figure 6 and Figure 7) to wake up the hose
tracker and right controller.
9
Summary of Contents for Extinguisher V3
Page 11: ...10 ...
