Front suspension arm assem-
bled. Note; shock is mounted
in center hole in arm. Bottom
is retained with 4-40 x 1/2”
BHS. Top with 4/40 x 5/16”
BHS. Top of shock is mounted
in upper outer hole.
The camber link is mounted to
the inner hole in the caster
block on the front side of the
block.
Below left is a photo of the front steering block, with the carbon fiber extension attached and the #5 camber insert partially
installed in the block.
The bearing and axle installation is described below but the photo on the right shows them in the order of assembly as well as
the upper and lower king pin bushings and king pin screws.
