Owner’s manual
|
V-MATE SERIES
Full range bi-amplified Loudspeakers
10
Full range bi-ampliFied
loudspeakers
CoNTrol dIgITal dIsplaY
The 2 row 16-characters display allows you to carefully check all the content of the SD card input and/or the device
connected to the USB port.
Using the MP3 player remotely controlled by Bluetooth, the display will only show “CONNECTED”.
kEYs
MODE ON/OFF Press this key to select the play mode between USB/SD CARD and BLUETOOTH. Pressing this key for
more than three seconds, you can turn off or turn on the MP3 player.
PLAY/PAUSE It allows you to play and pause the player. Hold this key to select play mode T-ALL.
T-all is for reproduction of first ten songs of each folder.
STOP
It stops player playback.
REPEAT
Press this key to select play mode between ALL - ONE – RANDOM. Pressing more times this key,
playback mode changes as follows: ALL - ONE – RANDOM. ALL is for song reproduction by number,
OnE is for just one song play, RanDOm is for random play. The factory default setting is all.
WarNINg: please note that the mp3 player plays all the songs following uploading sequence from computer, so
the 1st uploaded song will be the first to be played by mp3 player, the 2nd uploaded song will be the second
to be played, and so on. so, reproduction play list must be created before uploading the songs, based on your
needs. To change reproduction order, you’ve to upload again all the tracks of that folder or to create a new
folder with right upload play-list.
PREV
To play previous song; by holding the key you achieve fast rewind.
NEXT
To play next song; by holding the key you achieve fast forward.
rEmoTE CoNTrol
ON/OFF
To turn on and off the MP3 player.
STOP
Press this key to stop MP3 playback.
MUTE
Press this key to mute the MP3 player.
MODE
Press this key to select the play mode between USB/SD CARD and BLUETOOTH.
REPEAT
Press this key to select play mode between ALL - ONE – RANDOM. Pressing more times this key,
playback mode changes as follows: ALL - ONE – RANDOM. ALL is for song reproduction by number,
OnE is for just one song play, RanDOm is for random play. The factory default setting is all.
EQ
Press this key to choose MP3 section presets among JAZZ, ROCK, POP, CLASSIC, USER.
PREV
Press this key to play previous song.
NEXT
Press this key to play next song.
PLAY/PAUSE
Press this key to play and pause the player.
VOL-
Press this key to reduce the MP3 volume.
VOL+
Press this key to raise the MP3 volume.
NUMERIC KEYS
Press the key combination to play the desired song.
Note: please, maintain a “straight line of sight without obstacles” between the remote control and V-maTE Ir
lEd, which is close to your speaker frontal “oN” blue lEd.
1.4 iOS BLUETOOTH
®
PROCEDURE
IpHoNE – Ipad proCEdurE
1) From the Settings menu => activate bluetooth on your Apple device => ‘I’ => Devices => Looking for ...
2) Set the potentiometers and MP3 Master Volume in central position. It’s important to listen the tones issued by MP3/
BlUETOOTH section.
3) Switch on the
V-mATE
unit.
4) Pressing the MODE button (by default the MP3 player is turned on) the display shows the message “Bluetooth Initializing
...”. A tone (bup) is issued, and the detection procedure starts.
13
14
15
