FitLogic MIRACLE R270, Owner'S Manual

Page: 17 / 82

16
incline. Press “MODE” to complete the setting of the first section and also go to the
setting of the next section till all the 10 sections are completed. The setted data
will be saved without losing due to the power off until next time when you reset it.
2. Start-up of the user’s program:
Under the standby state, press “PROGRAM”until it shows the user’s program
(U1-U3), set the running time that you need and press the “START” button for
starting the treadmill.
3. User’s program set-up explanation:
Each user’s program divides time to be ten sections, the treadmill can only be
started after the speed and the incline are set well for the 10 sections and the
running time can also be set well.
Range of programs:
SETTING CONTENT
BEGINNING SETTING OF
BEGINNING
SET-UP
RANGE
DISPLAY
RANGE
TIME(MIN:SECOND) 0:00 15:00 5:00-99:00 0:00 － 99:59
INCLINE(%) 0 0 0-12 0-12
SPEED(K/h) 1.0 1.0 1.0-16 1.0-16
DISTANCE(K) 0 1.0 0.5-99.9 0.00
－
99.9
PULSE(hypo/min) P N/A N/A 50-200
CALORIE(THERM) 0 50 10-999 0
－
999
BODY TESTER:
At the beginning state, press “ PROGRAM” continually to enter into the body FAT tester, press
“MODE” enter F-1, F-2, F-3, F-4, F-5 (F-1 SEX, F-2 AGE, F-3 HEIGHT, F-4 WEIGHT, F-5 FAT
TESTER), Press “SPEED+”, “SPEED -” to set F-1 ---- F-4 ( refer to the following chart), after
that, press “ MODE” to set F-5, then grasp the hand pulse, the window will display your body
quality index after 3 seconds. The body quality index is to test the relation between height and
weight, not referring to the body proportion. The body FAT suits for any male and female,
offering reference information of adjusting people’s weight. The ideal FAT should be 20-25, if
under 19, it means too thin. If between 25 and 29, it means overweight, if over 30, it means
obesity. (The data is just for reference, can not be used as medicinal data).