FitLogic MIRACLE R270, Owner'S Manual

Page: 14 / 82

13
MANUAL MODE:
1. When the treadmill is under the standby state, press START button, the
treadmill will start to run from the speed 1.0km/h and the inline of “0” level. The
other windows will also start to count up from “0”, press “”,”INCLINE-”,
“SPEED+”, “SPEED-” to change the incline and speed.
2. Set up the TIME, press “MODE” button to enter into time count-down, the TIME
window will display “15:00” and glitter. Press “”,”INCLINE-”, “SPEED+”,
“SPEED-” to set up the time that you need. The setting range is 5:00-99:00.
3. In TIME setting mode, press “MODE” button to enter into distance count-down,
the DISTANCE window will display “1.0” and glitter. Press “”,”INCLINE-”,
“SPEED+”, “SPEED-” to set up the distance that you need. The setting range is
0.5—99.9.
4. To set up the CALORIES, press “MODE” button to enter into calories count
down, the CAL window will display “50’ and glitter. Press “”,”INCLINE-”,
“SPEED+”, “SPEED-” to set up the calories that you need. The setting range is
10-999.
5. When setting is finished, press “START” button to start up, the treadmill will
run after 3 seconds, press “”,”INCLINE-”, “SPEED+”, “SPEED-” to adjust
the speed and the incline; press the PAUSE, the treadmill will stop.
PRESET PROGRAMS:
Press “PROGRAM” button “CAL /PULSE” window will display P1-P15 to choose the
program you like. Setting the running time, then the TIME window display will be
flashing; Display the advance setting time10:00, press “”,”INCLINE-”,
“SPEED+”, “SPEED-” to set up the exercise time what you need. Press “START”
button to start the inner install program, the inner install program is divided into
10 sections. Each exercise time=the setting time/10. When the system enters into
the next section, it will make 3 sound “Bi—Bi—“ and the speed will be changed
according to the setting speed of the program, then press “”,”INCLINE-”,
“SPEED+”, “SPEED-” to change the INCLINE and SPEED as you need. When the
program enters into the next section again, the system will make 3 sound
“Bi—Bi—“ and change to the setting speed of the program automatically.