55
ELECTRIC TREADMILL
MC-260
EN
STORAGE AND TRANSPORT
FOLDING AND TRANSPORTING
Unlock the console lock knob and set the vertical column to position 1, release the knob and drop the column to
position 2.
To transport the belt place the belt in vertical position, as shown in the picture, peel off the wheels by pressing in the
direction (A) and when holding itself (B), release your hands.
STORAGE
Store equipment in a clean, dry, indoor location. Never leave or use the unit outdoors. Make sure the main power switch
is turned off and the power cord is disconnected from the wall outlet.
Problem
Cause
Solution
The display shows “E04”
Sudden high current protection
Disconnect the power and reconnect it.
Replace the power supply sleeve on the PCB.
Check if any part of the machine is jammed.
The display shows “E05”
The electrical protection has been
triggered.
Check that the input voltage is normal
Make sure the treadmill is not hooked or
cannot rotate because of an obstruction.
Check all connections
The display shows “E06”
Problem with motor cable
Reconnect the motor cable or replace it.
2
1
B
A
