8
ASSEMBLY
Step 5:
Disengage the height adjuster knob by
pulling outward and install the seat assembly
onto the Main Frame
(F)
Re-engage the height
adjuster knob. Using the 5mm Allen Wrench
(BB)
(supplied), install the M8*16 Bolt
(FF)
and lightly
hand tighten. Final adjustments to the desired
seat height will be completed after final assembly
in Step 8.
Figure 5
Step 6:
Disengage the height adjuster knob by
pulling outward from the Main Frame
(F)
. Using
the 5mm Allen wrench
(BB)
(supplied), remove the
M8*16 Bolt
(BB)
and set aside for reinstallation.
Remove Desktop Post
(B).
On a clean surface,
free of debris that could possible scratch the
surface, turn the Desktop
(A)
over to install the
Desktop Post
(B)
. Using a 5mm Allen Wrench
(BB),
install
the
four M8*16 Bolt
(FF)
(supplied)
and tighten. Upright the Desktop and install the
assembly into the Main Frame
(D)
. Reinstall
the M8*16 Bolt
(FF)
and lightly tighten
Final
adjustments to the desired desktop height will be
completed after final assembly in Step 8.
Figure 6
Desktop
Desktop Post
Seat Assembly
Height Adjuster
Knob
Figure 5
Figure 6