After Sales Support
TEL:
1300 886 649
38
Page
No sound:
•
If you are not getting any sound into the software application, go back to the preferences as
shown above and make sure you have selected the USB input for the recording device.
•
Power Cycle: Close Audacity, turn off the Cassette Tape Deck, unplug the USB Cable. Then
plug in the USB Cable, turn on the Cassette Tape Deck, and re-open Audacity.
•
If you are not able to hear any audio as you play the record, please click on the microphone
drop-down arrow and select Monitor Input. This will enable you to hear the audio from the
Cassette Tape Deck, even if you have not record-enabled the Audacity application.
•
If you are not seeing the microphone slider, please go to the Preferences menu in Audacity,
click on the Interface tab and make sure that the Enable Mixer Tool bar and Enable Meter Tool
bar options are checked. If they are not, please check them and then press OK.
•
Check the microphone slider to make sure that it is at full volume, all the way to the right as
shown in below: If you are not seeing the microphone slider, please go to the previous step and
start again.
FAQ’S
