EasyGrid LT User Guide
4
FISO recommends using SEN-PS-EXT power supply with your monitor and verify that the voltage
specifications indicated on the power supply are compatible with the AC voltage and frequency delivered
at the power outlet.
Do not operate in wet/damp conditions.
Do not expose to outdoor conditions. Install the unit in a protective enclosure.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
WARNING
This equipment must be used as specified or the protection provided by the equipment may be
compromised. You must use this product in a normal mode and should not deviate from the
written instructions provided.
Unpacking and Inspection
3.3
The EasyGrid LT monitor is shipped inside a carton designed to give maximum protection during
shipment. If the outside of the shipping carton is damaged, notify your shipping department
immediately. Your shipping department may want to notify the carrier.
If the shipping carton is not damaged, carefully remove and identify all of the components listed below.
Contact FISO or your local representative if any of the components are missing. We recommend you save
the shipping carton for future storage or transportation.
The EasyGrid LT package should include the following components:
EasyGrid LT unit
Power terminal wires (16 AWG)
USB interface cable
ST Connector One Click Cleaner
Calibration Certificate
EasyGrid LT User Guide
Nortech Client software installation CD
