- 7 -
Installation Options continued…
Once the control module is removed you must manually
set the preamp to ON. This allows the preamp to operate
properly without the control module in place. Set the
switch marked with a “1” to the “ON” position
.
At this time, you must also choose to set the preamp to
either the Flat or Bass Boost voicing. Use the switch
marked with a “2” to select the desired voicing.
You can
now replace the preamp cover and install the preamp in
the guitar.
Classical Style Control Modules
For nylon string guitars, or steel string guitars with unique
bracing patterns, remove the top cover of the Volume and
Tone module (and the Blend module if installing the Mic
Blend) and replace them with the alternate supplied classical
covers.
To convert the steel string mounts to classical mounts,
remove the adhesive on the cover to expose the small Philips
head screw. Remove and place the screw aside as you will
need it to attach the classical cover.
On the back end of the module, remove the 1.5mm hex screw
and place it aside as you will need this screw to attach the
classical cover.
Remove the steel string cover(s) and replace it with the
classical cover(s) using the original Philips and 1.5mm screws.
After both screws are in place, the control module(s) are
ready to install into the guitar. Return to
Control Module
Installation
on page 4
