7
2.
An integrated protection circuit actively monitors the electrical current
consumption from inside the battery housing. Should a circuit overload occur
(caused from binding, motor bail tripping, or operating under high
load), the circuit breaker instantly disables all power to the motor and PWM. A
sign of this condition is that the battery LED indicator light goes off whenever the
Rocker Switch is pressed. After correcting any problem, restore power by turning
the battery switch OFF then ON again.
3.
The Front Drag must be set correctly for line and proper motor performance.
Over-setting the drag may cause the SMART BATTERY circuit breaker to trip.
4.
HIGH speed remains available regardless of the PWM dial position. Should a
circuit malfunction occur, this bypass feature allows limited HIGH-speed use
only.
5.
The PWM speed selector dial also employs an integrated ON/OFF circuit switch.
Be sure that PWM dial is clicked ON before attempting to choose a PRESET
speed position OR if experiencing lack of PRESET speed functionality.
6.
Always turn OFF all power and disconnect the battery after each use.
Fishing Abilities, Inc.
22770 Adams Rd.
South Bend IN, 46628
(574) 273-0842
