www.eu.fishersci.com/fisherbrand
13
2.4.1 Connecting the Inlet Feed Water Tubing
2.4.1.1
Remove the stopper on the water inlet
by pressing the collet on the adapter
towards the system to pull out the
stopper.
2.4.1.2
1) Insert one end of the PE tubing into
the water inlet (Note: make sure to
insert the tubing all the way in for about
20 mm).
2) Gently pull the tubing outwards to
check if the connection is secure.
2.4.1.3
Connect the other end of the tubing to a
feed water tank; ensure the tubing inlet
is immersed to the bottom of the tank.
2.4.2 Connecting Power Cord
1) Make sure the power switch is OFF
at "O" position.
2) Insert one end of the power cord into
socket on the left side of the Accu100
system.
3) Plug the other end of the power cord
into power outlet.
Collet
Stopper
Feed Water inlet
Feed tank
Power cord
