www.eu.fishersci.com/fisherbrand
26
3.3 Routine Operations
Fisher Scientific recommends users to keep the system in Ready mode to
get top quality ultrapure water. Do not turn off the power under normal
conditions.
Dispensing Water
1) Press the UP button. Ultrapure water will be dispensed after a
60-second cleaning cycle. Press the UP button again to stop
dispensing.
2) If you dispense ultrapure water again within 1 minute after the
previous dispense, the 60-second cleaning cycle will not re-initiate.
UP water is dispensed immediately after pressing the UP button.
Press the UP button again to stop dispensing.
3) Press the RO button. RO water will be dispensed after a 60-second
cleaning cycle. Press the RO button again to stop dispensing.
If the START button is pushed when the system is in Ready mode, the
system will go to Standby. No water will be dispensed. Press the
START button again to put the system back into Ready mode.
