14 through 20-Inch Design V150 and V300
2
Table 1. Specifications
Valve Sizes and End Connection Styles
Design V150: 14, 16, and 20-inch sizes with Class
150 raised-face flanges as shown in table 3
Design V300: 14 and 16-inch sizes with Class 300
raised-face flanges as shown in table 3
Maximum Inlet Pressures
(1)
Consistent with the pressure-temperature ratings in
table 3, but do not exceed the material temperature
capabilities or the pressure drop limitations shown
in the bulletin
(2)
. For CG8M (317 stainless steel)
valves, the pressure-temperature tables are shown
in the bulletin
(2)
Maximum Shutoff Pressure/Temperature Ratings
(1)
Composition (TCM, TCM III, and TCM IIIC) and
HD (Heavy Duty) Metal Ball Seals: Refer to the
bulletin
(2)
. For information on pressure classes,
contact your Fisher Controls sales office or sales
representative
Shutoff Classification
Composition Ball Seal (Forward Flow): Class VI
per ANSI/FCI 70-2-1991 and per IEC 534-4,
Amendment 1 (1986)
HD (Heavy Duty) Metal Ball Seal (Bidirectional
Flow): 0.01% of valve capacity at full travel; Class
IV per ANSI/FCI 70-2-1991 and per IEC 534-4,
Amendment 1 (1986)
Flow Ring Construction (Bidirectional Flow):
5% of valve capacity at full travel
Material Temperature Capabilities
(1)
Composition Seals: –50 to 450
F (–46 to 232
C)
HD Metal Seals: –50 to 550
F (–46 to 288
C)
Flow Ring with PTFE Packing: –50 to 450
F (–46
to 232
C)
Flow Ring with Graphite Ribbon Packing: –325
to 1000
F (–198 to 538
C)
PEEK/PTFE Bearings: –50 to 500
F (–46 to
260
C)
Flow Characteristic
Approximately equal percentage
Standard Flow Direction
Forward (into the convex sealing face of the
V-notch ball)
Actuator Mounting
Right-hand, or
left-hand as viewed from the
upstream end of the valve
Maximum Ball Rotation
90 degrees
Valve/Actuator Action
With diaphragm or piston rotary actuator, field-re-
versible between push-down-to-close (extending
actuator rod closes valve) and push-down-to-open
(extending actuator rod opens valve)
Face-to-Face Dimensions
Design V150
14 and 16-Inch Valves: Consistent with ASME
B16.10 short
20-Inch Valves: 20 inches (508 mm)
Design V300
14-Inch Valves: 15 inches (381 mm)
16-Inch Valves: 16 inches (406 mm)
Drive Shaft Diameters and Valve Assembly
Weights
See table 2
14, 16, and 20-Inch Valves: Standard valve
construction is with right-hand mounting. Left-hand
mounting (optional) is available upon request.
1. The pressure or temperature limits in this manual and any applicable code limitations, should not be exceeded.
2. Refer to the appropriate Bulletin 51.3:V150 or 51.3:V300 for additional information.
Table 2. Valve Sizes, Drive Shaft Diameters, and Valve Assembly Weights
VALVE SIZE
DRIVE SHAFT
DIAMETER
VALVE
ASSEMBLY WEIGHT
Inch
mm
Inch
mm
lb
kg
Inch
mm
Inch
mm
V150
V300
V150
V300
14
350
1-3/4
44.5
545
825
206
374
16
400
2-1/8
54.0
735
1125
333
510
16
400
2-1/8 x 2
54.0 x 50.8
735
1125
333
510
20
(1)
500
(1)
2-1/2
63.5
1155
- - -
524
- - -
1. 20-Inch size available only for V150, not for V300 valves.