Fisher FHIF-WHS-120CE3, Service Manual

Page: 36 / 75

R32 ATW Service Manual
34
11.2 Installation for hydronic module
11.2.1 Select the best location
 There should not be any heat source or steam near the unit.
 A place where air circulation in the room is good.

A place where drainage can be easily done.
 A place where noise prevention is taken into consideration.
 Do not install the unit near the door way.
 Ensure the spaces indicated by arrows from the wall, ceiling, fence or other obstacles.
 Recommended installation height for indoor unit shall be at least 800 mm.
 Must install on a vertical wall.
 When install electrical equipment at wooden building of metal lath or wire lath, according to
electrical facility technical standard, no electrical contact between equipment and building is
allowed. Insulator must be installed in between.
 Do not install the unit at outdoor. This is designed for indoor installation only.
11.2.2 Installation dimensions
(1) Wall mounted panel size. (mm)
 The mounting wall is strong and solid enough to prevent it from vibration.
 Always mount the installation plate horizontally plate by aligning the marking thread and using
a level gauge.
 Mount the installation plate on the wall with 8 sets of plug, bolt and washer (all non-supply)
with different size.
(2) Space required for installation and maintenance. (mm)