behr TRS 300
– 20 –
271005
behr TRS 300
– 21 –
© behr Labor-Technik 2007
271005
A program can thus be written as
follows:
► For the first step, enter the required function
and the corresponding values.
► Select
==>>
. This then leads to the next
program step.
► Continue this procedure to program all the
required steps.
► Select
<<==
if you wish to check or modify the
program step entered. Use
==>>
to move for-
ward again.
► Remember to enter End (Function E) as the
final step. An End step is only not needed if the
program has ten steps.
► Press
<<==
repeatedly to return to the Start
menu.
Which program settings are most useful for
you will depend on your digester, the digestion
method and the nature of the samples.
