behr TRS 300
– 14 –
271005
behr TRS 300
– 15 –
© behr Labor-Technik 2007
271005
Second page: Autostart settings
The Autostart settings can be selected on this
page. You can, for example, set the unit to pre-
heat at a specified time or to start a temperature
program at a specified time.
Autostart
The following possibilities can be
selected here:
Off
- the TRS 300 will only start to
heat when a program is started or
On
is selected in the Start menu.
On
- the TRS 300 will preheat to
the starting temperature of the most
recently selected program as soon
as it is switched on at the mains
switch (p. 7, 2.3).
Prg
- the TRS 300 will start the
most recently selected temperature
program at the
Start time
.
Tme
- the TRS 300 will start to pre-
heat to the starting temperature of
the most recently selected tempera-
ture program at the
Start time
.
Start time
Starting time for
Prg
and
Tme
.
The value can be set digit-by-digit,
as described above.
<==
back.
Selecting
<<== back
repeatedly returns the unit
to the Start menu.
START TIME
AUTOSTART
<<==
==>>
OFF
11:20
