Shelves
Shipped inside each cabinet are shelves packed in plastic
and a bag of shelf supports. Two different types of shelf
supports are used. The shelf supports have tab lengths
of 1/4 inch and 1/2 inch. The 1/4 inch versions are used
in the front of the shelf (see below) and the 1/2” shelf sup-
ports are used in the rear.
Shelf spacing is adjustable to suit user requirements.
Insert four shelf supports for each shelf into the pilasters
as shown. Note the numbers on the pilasters. Place
supports on the same numbers on each pilaster to ensure
the shelf will be level. Place the shelf on the pilasters as
shown in Fig’s 2 and 3.
Replacement shelves are available individually. See
Replacement Parts
for shelf part numbers. Proper shelf
orientation is illustrated in Figure 2.
7
Note
Chromatography units include addi-
tional 1/2 shelves, which can be
used in place of the full shelves.
Figure 2 - Use 1/4” tab length supports on sides
and 1/2” in back.
UNPACKING AND INSTALLATION
Figure 3 - Place shelves at desired height on four
shelf supports.
