10
Setting the Temperature
To change the set temperature, press and release the
Menu keypad once. The display will flash SP and the
Mode LED will be illuminated. The last set temperature
will then be shown in the display. To change the tempera-
ture, press the UP or DOWN arrow key. The adjustable
temperature range is 1 to 12°C (34 to 54°F). When the
desired set temperature is displayed, press the Menu key-
pad to enter the set temperature and activate the
Units
Selec
t menu.
Units Select
The second menu selects the units. The refrigerator con-
trol displays temperature in °C or °F. The factory setting
is °C. Starting from the temperature display mode (Mode
LED off), press the Menu key twice. The current temper-
ature units are displayed. To switch between units, press
the UP or DOWN arrow key then press the Menu key to
select. The unit LED will be displayed on the right of the
temperature display.
Calibration Offset
In the event the refrigerator needs to be calibrated, a sim-
ple routine is available to adjust the display and control
point to a referenced standard. To set a temperature off-
set, press and hold the Menu keypad for 5 seconds. The
display will flash
oS
followed by the last temperature off-
set value. The factory setting is 0. To change the offset
value, press the UP or DOWN arrow key, then press the
Menu key. The value shown in the display will be added
to the previous temperature reading. The display will
then flash
Ho
.
For Example:
The display indicates 4°C but a reference thermometer in
the refrigerator chamber indicates 6°C. The operator
presses and holds the Menu keypad for 5 seconds, then
changes the display value from 0 to +2 by using the UP
arrow key. Press the Menu key again. Now the display
indicates a chamber temperature of 6°C and the con-
troller begins to cool (as long as 3-min. delay period has
expired) to the desired temperature of 4°C as shown on
the reference thermometer.
O
PERATION
