11.0
Operation and Adjustments
77
- Slide the Metal Harness Retainer through
the Harness Slot opening in the Seat Pad
and Seat Base.
- Pull the Metal Harness Retainer down
through the Harness Slot on the
shoulder away from the bottom of the
Seat Base, position the Metal Harness
Retainer
flat against the Car Seat and
pull on the Harness Strap to remove
all slack.
- Check that the Metal Harness Retainer
is flat against the surface of the Car Seat.
- Repeat for other Harness Strap and
Crotch Belt.
b. Secure Harness Straps to Back Support.
- From the front of Back Support,
slide top corners of Back Support
pad off Back Support exposing
Harness Slots in Back Support.
- Rotate the Metal Harness Retainer
and Harness Strap to position the
narrow side of the Metal Harness
Retainer into the Harness Slot in
the Back Support pad.
- Slide the Metal Harness Retainer
through the Harness Slot opening in
the Back Support pad.