Fisher-Price Safe Voyage Grow-with-Me FP3000C Manual Download Page 77

Page: 77 / 91

Harness Assembly:

WARNING!

• Harness Straps must be at or

JUST ABOVE

the child’s shoulders.

Failure to properly

adjust the Harness on your child increases

the risk of death or serious injury in the

event of a sudden stop or crash.

• Harness Strap Covers must always be

used when using Harness system.

• Metal Harness Retainer must be properly

seated, flat against the back surface of the Car Seat.

a. Secure Harness and Crotch Belt

to Seat Base.
- From the top of Seat Base, rotate the

Metal Harness Retainer and Harness

Strap to position the narrow side of the

Metal Harness Retainer into the Harness

Slot in the pad.

11.0

Operation and Adjustments

Summary of Contents for Safe Voyage Grow-with-Me FP3000C




























































































Search results

Summary of Contents for Safe Voyage Grow-with-Me FP3000C

Reviews:

Related manuals for Safe Voyage Grow-with-Me FP3000C

Brands by name

Popular brands

Fisher-Price Safe Voyage Grow-with-Me FP3000C, Manual

Search results

Summary of Contents for Safe Voyage Grow-with-Me FP3000C

Reviews:

Related manuals for Safe Voyage Grow-with-Me FP3000C

Brands by name

Popular brands