manualshive.com logo in svg

Fisher-Price POWER WHEELS LittlePeople Tot Rod, Owner'S Manual With Assembly Instructions, Page: 20 / 24

Share
Download
Fisher-Price POWER WHEELS LittlePeople Tot Rod Owner'S Manual With Assembly Instructions Download Page 20

20

• Your vehicle has a patented, electronic braking system

that automatically stops the vehicle when your child’s
foot is lifted from the pedal.

• Make sure your child is comfortable with steering the

vehicle and automatically knows how to stop.

• Make sure the shifter is in the DRIVE position     .

• Press the foot pedal. The vehicle drives forward at a

maximum of 3

1

/

2

mph.

• Help your child practice steering to learn how far and

how quickly to turn the handlebar when driving forward.

FORWARD

TO STOP

• Move the shifter to the REVERSE position    .

• Press the foot pedal. The vehicle drives in reverse at a

maximum of 3

1

/

2

mph.

• Help your child practice steering to learn how far 

and how quickly to turn the handlebar when driving 
in reverse.

Shifter

Shifter

REVERSE

IMPORTANT! To avoid damaging the motors and
gears, make sure to stop the vehicle before switching
from drive to reverse.

IMPORTANT! use the vehicle ONLY outdoors. Most
interior flooring can be damaged by riding this vehicle
indoors. Fisher Price

®

will not be responsible for

damage to the floor if the vehicle is used indoors.

How to Operate 

Your Vehicle

How to Operate 

Your Vehicle

L

G4626pr-0920  5/28/04  1:29 PM  Page 20

Summary of Contents for POWER WHEELS LittlePeople Tot Rod

























Reviews:

No comments