Assembly
CAUTION
• The rear axle, rear door hinge pin and front axles were
secured to the vehicle body for shipment. Remove and set
these parts aside for assembly. Slide the front axles toward
the center of the vehicle body to remove them.
• Position the vehicle body upright.
• Wipe the areas where labels will be applied with a clean,
dry cloth. Apply labels 2, 21, 18 and 19 to the vehicle body
as shown above. For best results, avoid repositioning a
label once it has been applied.
• Stand the vehicle body on its back end.
• From the underside of the vehicle, fit the steering wheel
retainer into the hole in the vehicle body.
• From the top side of the vehicle body, fit the steering
wheel stem through the hole in the dash area and into
the steering wheel retainer.
•
Press firmly to snap the steering wheel into the retainer.
You may need to rotate the steering wheel while pressing
it into the retainer.
Please keep small parts and plastic bags
out of children’s reach. Dispose of
plastic bags properly.
1
2
19
18
21
2
3
Front Axles
Rear Door
Hinge Pin
Rear Axle
Vehicle Body
Vehicle Body
Hole
Vehicle Body
Steering Wheel
Retainer
Steering Wheel
3
• Wipe the areas where labels will be applied with a clean,
dry cloth. Apply labels 6, 9 and 12 to the vehicle body as
shown above. For best results, avoid repositioning a label
once it has been applied.
4
Roof
12
9
6
