7
IMPORTANT!
Before each use, inspect this product for damaged
hardware, loose joints, missing parts or sharp edges. DO NOT use if
any parts are missing or broken. Contact Mattel for replacement
parts and instructions if needed. Never substitute parts.
Power Switch
• Slide the power switch to any of five speed settings.
• Give the seat a light push to start the swinging motion.
Adjust the power switch to the desired swing motion setting.
Hint:
As with most battery-powered swings, a heavier child will reduce the
amount of swinging motion on all settings. In most cases, the low
setting works best for a smaller child while the high setting works best
for a larger child.
• If swinging stops while using a lower setting, try a higher
setting. Give the seat a light push to start the swinging
motion again.
• Be sure to turn this product off when not in use. Slide the
power switch to the off setting .
• For baby's enjoyment, attach the toys to the toy rings on
the hubs.
Starting the Swing
Room-to-Room Portability
• Make sure your child is properly secured in the swing seat.
• Grasp both handles on the top of the swing and lift.
• Carefully carry the swing to another room. Be sure to set the
swing down on
a non-elevated, flat surface
.
