![background image](http://html.mh-extra.com/html/fisher-price/m0324/m0324_instructions-manual_2297836004.webp)
4
• Position the seat frame so that the tubes are upright,
as shown.
Hint:
Note the location of the socket inside each seat hub. The ends of the
frame arms will be inserted into these sockets.
• Fit the end of each frame arm into the socket in each seat hub.
Base Tube
Assembly
• While standing on the base tube, pull the back legs up. The back
legs
should remain secured
to the base tube. If you can remove
the back legs, you have not assembled them correctly to the
base tube. Re-read and repeat assembly step 4.
PULL UP
Frame Arm
Frame Arm
Seat Frame
Seat Hub
Seat Hubs
Socket
Seat Hub
Seat Hub
• Insert a 3 cm screw through the outside of each seat hub and
into each frame arm. Tighten the screws.
• Fit the pad upper pocket over the seat back tube.
• From behind the assembly, insert the waist belts through the
slots in the pad.
• Press to fasten the waist belt assembly to the pad.
Seat Back Tube
Pad Upper Pocket
Waist Belts
Waist Belt
Waist Belt
Slots
Slots
Waist Belt
Fasteners
Slots
5
6
7
8