background image

Assembly

•  Place a scrap block of wood under the front 

wheel assembly.

•  Fit a pedal on the pedal axle. Tap the pedal with a 

hammer until it is secure.

•  Pull the pedal up to be sure it is secure. If you can 

remove it, you have not secured it properly. Tap it with 
the hammer again.

•  Repeat this procedure to attach the other pedal to the 

other end of the pedal axle.

Front Wheel 
Assembly

Scrap Block 
of Wood

Pedal Axle

Pedal

•  Place the front wheel assembly between the fork arms. 

Make sure the pedal axle fits into the groove at the
bottom of each fork arm.

•  Place a fork cover over the pedal axle on one fork arm. 
•  Insert two #8 x 3/4" screws into the fork cover

and tighten.

•  Repeat this procedure to attach the other fork cover 

to the other fork arm.

Fork Arms

Pedal Axle

Groove

Fork Cover

Front Wheel 

Assembly

Fork Post

Fork Cover

•  Insert the fork post up through the hole in the neck of 

the frame. Make sure the fork is positioned so that the 
fork covers face the rear wheels.

REAR OF 

TRIKE

•  Fit the handlebar front to the fork post.

Hint:

 The handlebar front is designed to assemble to the 

fork post one way.

•  Fit the handlebar back to the fork post and handlebar 

front. Hold them together firmly.

•  First, insert the remaining #8 x 3/4" screws through 

the outer holes in the handlebar back and tighten.

•  Then, insert the #8 x 21/4" screw through the center 

hole in the handlebar back and tighten.

Handlebar Front

3/

4" Screw

3/

4" Screw

21/4" 

Handlebar Back

10

12

13

11

Fork Post

Reviews: