Assembly
• Fit the tabs on the wheel cap into the slots in the
wheel hub. Push to "
snap"
the wheel cap in place.
• Repeat this procedure to attach the other wheel cap to
the other wheel hub.
• Fit two pedal hubs onto the pedal axle tabs. Make sure
the tabs fit into the slot in each pedal hub.
• Fit the cap nut on the end of the straight axle.
• Tap the cap nut with a hammer.
Gently pull the rear
wheel to be sure the cap nut is securely attached
to the straight axle.
Hint:
You may need the help of another adult to hold
the other end of the straight axle in place.
Wheel Hub
Wheel Cap
Pedal Hub
Pedal Hub
Pedal Axle Tab
Pedal Axle Tab
5
7
6
Front Wheel Hole
• While holding the pedal hubs
on the pedal axle, insert the
pedal axle into the hole in the
center of the front wheel.
• Press the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
• Turn the front wheel assembly
over.
• Insert the remaining pedal hubs on top of and below
the pedal axle and into the hole in the center of the
front wheel.
• Press the pedal hubs until they are flush with the
surface of the front wheel.
8
9
