background image

7

7

IMPORTANT!

Before each use, inspect this product for damaged

hardware, loose joints, missing parts or sharp edges. DO NOT use if
any parts are missing or broken. Contact Mattel for replacement
parts and instructions if needed. Never substitute parts.

Power Switch

Music Switch

• Slide the power switch to any of five speed settings. 
• Give the seat a light push to start the swinging motion.

Adjust the power switch to the desired swing motion setting.

Hint:

As with most battery-powered swings, a heavier child will reduce

the amount of swinging motion on all settings. In most cases, the low
setting works best for a smaller child while the high setting works best for
a larger child.

• If swinging stops while using a lower setting, try a higher

setting. Give the seat a light push to start the swinging
motion again.

• Be sure to turn this product off when not in use. Slide the

power switch to the off setting

.

• Slide the music switch to on with low volume

; on with

high volume

or off 

.

• Attach the toys to any of the links on the swing arms or

the toybar.

Attach Toys to These Links

Starting the Swing

Room-to-Room Portability

• To prevent serious injury or death from

falls and being strangled in the
restraint system, always use the
restraint system.

• It is dangerous to use this product on

an elevated surface.

WARNING

• Make sure your child is properly secured in the swing seat.
• Grasp both handles, as shown, and lift.
• Carefully carry the swing to another room. Be sure to set the

swing down on 

a non-elevated, flat surface

.

Summary of Contents for H4791









Reviews: