3
3
Assembly
1
2
Swing Frame Front Leg
Swing Frame Back Leg
• Slide the front and back legs on the swing frame outward
until they
“click”
into place.
• Repeat this procedure to open the other swing frame.
Base Tube
Press
Buttons
on Front Legs
• While pressing the buttons on the end of each front leg,
insert the front legs into the ends of one of the base tubes.
• Push the front legs down into the base tube until the
buttons
“click”
into place.
IMPORTANT!
Before assembly, inspect this product for damaged
hardware, loose joints, missing parts or sharp edges. DO NOT use if
any parts are missing or broken. Contact Mattel for replacement
parts and instructions if needed. Never substitute parts.
3
Base Tube
PULL UP
• While standing on the base tube, pull the front legs up. The
front legs
should remain secured
to the base tube. If you can
remove the front legs, you have not assembled them correctly
to the base tube. Re-read and repeat assembly step 2.
4
Base Tube
Press
Buttons
on Back Legs
• While pressing the buttons on the end of each back leg, insert
the back legs into the ends of the remaining base tube.
• Push the back legs down into the base tube until the buttons
“click”
into place.
