![background image](http://html1.mh-extra.com/html/fisher-price/h4791/h4791_instructions-manual_2297805004.webp)
4
4
• Position the seat frame so that the tubes are upright,
as shown.
Hint:
Note the location of the socket inside each seat hub. The ends of the
frame arms will be inserted into these sockets.
• Fit the end of each frame arm into the socket in each seat hub.
Base Tube
5
6
Assembly
• While standing on the base tube, pull the back legs up. The
back legs
should remain secured
to the base tube. If you can
remove the back legs, you have not assembled them correctly
to the base tube. Re-read and repeat assembly step 4.
PULL UP
Frame Arm
Frame Arm
Seat Frame
Seat Hub
Seat Hubs
Socket
Socket
7
Seat Hub
Seat Hub
• Insert a 1.9 cm screw through the outside of each seat hub
and into each frame arm. Tighten the screws.
#6 x 1.9 cm Screw – 2
8
• Fit the pad upper pocket over the seat back tube.
• From behind the assembly, insert the waist belts through the
slots in the pad.
• Press to fasten the waist belt assembly to the pad.
Seat Back Tube
Pad Upper Pocket
Waist Belts
Waist Belt
Fasteners
Slots