background image

6

6

Securing Your Child

To prevent serious injury or death from falls and being strangled in the
restraint system:

- Always use the restraint system.
- Not recommended for children who sit up by themselves (6 months approxi-

mately, until 9 Kg, 20 lbs).

• Never leave child unattended.
• It is dangerous to use this product on an elevated surface.

WARNING

Waist Belt

Restraint Pad

Buckle

• Place your child in the seat. Position the restraint pad between

your child’s legs.

• Fasten both waist belts to the buckles on each side of the

restraint pad. 

Make sure you hear a “click” on both sides.

• Check to be sure the restraint system is securely attached

by pulling it away from your child. The restraint should
remain attached.

Free End

TIGHTEN

LOOSEN

Anchored End

Anchored End

To tighten the belts:

Feed the anchored end of the belt up

through the buckle to form a loop 

. Pull the free end of the

belt 

. Repeat this procedure to tighten the other belt.

To loosen the belts:

Feed the free end of the belt up through the

buckle to form a loop 

. Enlarge the loop by pulling on the end

of the loop toward the buckle. Pull the anchored end of the belt
to shorten the free end of the belt 

. Repeat this procedure to

loosen the other belt.

Please Note:

After adjusting the belts to fit your child, make sure

you pull on them to be sure they are securely fastened.

Free End

Summary of Contents for H4791









Reviews: