6
Assembly
10
9
PULL HERE
PRESS HERE
Top View
Back View
Peg
Peg
Grooves
• Place your foot on the base to hold it steady.
• Press down firmly on the lower backboard
while rotating the backboard up.
• When properly assembled, the pegs on
the upper post rest in the grooves in the
backboard, as shown.
Note:
The height of the rim is 3 feet (1 m)
as assembled.
6
4
5
Lower Post
Rib
Groove
IMPORTANT! Assembly of the lower post to
the base is a permanent assembly.
• Align the rib on the bottom of the lower post
with the groove in the opening in the base.
Hint:
For easier assembly, apply a small
amount of liquid soap around the bottom of the
post. If assembling indoors, place a tarp under
the base to protect the floor surface.
• Push down on the lower post,using a circular
motion, until it snaps into place.
Collar
Lever
Hole
Peg
11
Note:
The collar may be factory assembled.
• Align the lever on the side of the collar with
the notch in the top of the lower post.
• Fit the collar onto the lower post, making sure
the peg on each side of the collar snaps into
the hole on each side of the post.
