Assembly
5
• With one side of
the assembly facing
you, fold back the
fabric and locate a
canopy retainer.
• Fit the canopy
retainer over the
frame tubes.
• Align the hole in the
canopy retainer and frame tubes
and insert an M4 screw through the front of the canopy
retainer, frame tubes and into the lock nut inside the
canopy retainer.
• Tighten the bolt with a Phillips screwdriver.
Do not over-tighten.
• Repeat this procedure to secure the other canopy retainer
to the other side of the frame, using the remaining M5 bolt.
Assembly is now complete.
Canopy
Retainer
Frame Tube
Hint:
An M4 lock nut has been assembled to each canopy
retainer at the factory. During shipment of this product, they
may have fallen out. Check to be sure there is a lock nut in
each hexagonal opening in the canopy retainers. If one
(or both) has fallen out, fit the lock nut into the hexagonal
opening in the canopy retainers. Make sure the rounded side
of the lock nut is facing out.
Shown Actual Size
M4 Shoulder Screw - 2
M4 Lock Nut
(Inside Canopy Retainer)
Rounded
Side
Frame Tube
4
• Lift the assembly so that each side of the base
“snaps”
into place.
• Open the ends of the bassinet.
6
